Clear Filters | 541 - 560 of 20861 results

180628-F-RV963-1015

U.S. Air Force Senior Airman Taylor Bryant, 525th Aircraft Maintenance Unit crew chief, goes through pre-flight procedures June 28, 2018, at Kadena Air Base, Japan. Rotational forces are integral to increasing our military combat capabilities, which are essential to U.S. power projection and security obligations. (U.S. Air Force photo by Airman 1st Class Greg Erwin)
Details Download

180706-F-XF291-0002

Typhoon readiness graphic
Details Download

180716-F-WU765-1021

U.S. Air Force, Airman Logan Tidwell, 44th Aircraft Maintenance Unit engine specialist, releases a bolt from an F-15 Eagle engine panel during joint-aircraft training with the 18th Component Maintenance Squadron July 16, 2018, at Kadena Air Base, Japan. In order to support contingency operations, Airmen who perform engine maintenance must become familiar with the airframe they are assigned to, its engine limits, emergency procedures and technical orders. (U.S. Air Force photo by Senior Airman Kristan Campbell)
Details Download

180717-F-WU765-1006

U.S. Air Force For Airman First Class Christopher Skeen (Left) and Airman First Class Cody Yeater (Right), 44th Aircraft Maintenance Unit engine specialists, prepare to service an F-15 Eagle during joint aircraft training between the 18th Component Maintenance Squadron and 44th Aircraft Maintenance Unit July 16, 2018, at Kadena Air Base, Japan. In order to support contingency operations, Airmen who perform engine maintenance must become familiar with the airframe they are assigned to, its engine limits, emergency procedures and technical orders. (U.S. Air Force photo by Senior Airman Kristan Campbell)
Details Download

180717-F-WU765-1010

U.S. Air Force Airman Logan Tidwell (left) and Airman 1st Class Christopher Skeen (right), 44th Aircraft Maintenance Unit engine specialists, access an F-15 Eagle engine panel during joint training with the 18th Component Maintenance Squadron July 16, 2018, at Kadena Air Base, Japan. Joint training allows maintainers working both the flightline and aerospace propulsion shop the opportunity to identify, diagnose and service repairs. (U.S. Air Force photo by Senior Airman Kristan Campbell)
Details Download

180717-F-WU765-1014

U.S. Air Force Airman Logan Tidwell, 44th Aircraft Maintenance Unit engine specialist, releases bolts from an F-15 Eagle engine panel during during joint-aircraft training with the 18th Component Maintenance Squadron July 16, 2018, at Kadena Air Base, Japan. Hush houses, which are built with noise dampening materials, quiet the engine within its walls and are ideal for training scenarios. (U.S. Air Force photo by Senior Airman Kristan Campbell)
Details Download

180717-F-WU765-1017

U.S. Air Force, Airman Logan Tidwell, 44th Aircraft Maintenance Unit engine specialist, releases a bolt from an F-15 Eagle engine panel during joint-aircraft training with the 18th Component Maintenance Squadron July 16, 2018, at Kadena Air Base, Japan. Joint training allows maintainers working both the flightline and aerospace propulsion shop the opportunity to identify, diagnose and service repairs. (U.S. Air Force photo by Senior Airman Kristan Campbell)
Details Download

180717-F-WU765-1018

U.S. Air Force Airman 1st Class Christopher Skeen, 44th Aircraft Maintenance Unit engine specialist, awaits instruction during joint-aircraft training with the 18th Component Maintenance Squadron July 16, 2018, at Kadena Air Base, Japan. In order to support contingency operations, Airmen who perform engine maintenance must become familiar with the airframe they are assigned to, its engine limits, emergency procedures and technical orders. (U.S. Air Force photo by Senior Airman Kristan Campbell)
Details Download

180717-F-ZC102-1001

U.S Air Force Senior Airman Rodulfo Castro, 18th Aerospace Medical Squadron bioenvironmental engineering technician, inspects a manual Wet Bulb Globe Temperature Meter July 19, 2018, at Kadena Air Base, Japan. The temperatures taken are used to determine the current flag conditions for the entire installation. (U.S. Air Force photo by Senior Airman Omari Bernard)
Details Download

180717-F-ZC102-1002

U.S Air Force Senior Airman Rodulfo Castro, 18th Aerospace Medical Squadron bioenvironmental engineering technician, calibrates an electronic Wet Bulb Globe Temperature meter July 17, 2018, at Kadena Air Base, Japan. The 18th Aerospace Medical Squadron’s Bioenvironmental Engineering Flight uses Wet Bulb Globe Temperature Meters to monitor humidity, radiant and dry heat. (U.S. Air Force phot by Senior Airman Omari Bernard)
Details Download

180717-F-ZC102-1003

U.S Air Force Senior Airman Rodulfo Castro, 18th Aerospace Medical Squadron bioenvironmental engineering technician, configures an electronic Wet Bulb Globe Temperature Meter July 17, 2018, at Kadena Air Base, Japan. The 18th AMS Bioenvironmental Engineering Flight checks the current temperatures throughout the day to ensure the safety of Airmen and civilians working in the heat. (U.S. Air Force photo by Senior Airman Omari Bernard)
Details Download

180717-F-ZC102-1005

U.S Air Force Senior Airman Rodulfo Castro, 18th Aerospace Medical Squadron bioenvironmental engineering technician, checks the current flag condition using a manual Wet Bulb Globe Temperature Meter July 17, 2018, at Kadena Air Base, Japan. The 18th AMS Bioenvironmental Engineering Flight prevents heat-related injuries through education and monitoring. (U.S. Air Force photo by Senior Airman Omari Bernard)
Details Download

180717-F-ZC102-1007

The 18th Aerospace Medical Squadron’s Bioenvironmental Flight uses Wet Bulb Globe Temperature Meters to monitor humidity, as well as radiant and dry heat July 17, 2018, at Kadena Air Base, Japan. The temperatures taken from the device are then used to determine the current flag condition and the work/rest cycle for Kadena Air Base. (U.S. Air Force photo by Senior Airman Omari Bernard)
Details Download

180717-F-ZC102-1008

The 18th Aerospace Medical Squadron’s Bioenvironmental Flight uses an electronic Wet Bulb Globe Temperature Meters to monitor humidity, radiant and dry heat July 17, 2018, at Kadena Air Base, Japan. There are three types of heat related injuries: cramps, exhaustion and stroke. All are easily preventable. (U.S. Air Force photo by Senior Airman Omari Bernard)
Details Download

180717-F-ZC102-1009

U.S Air Force Senior Airman Rodulfo Castro, 18th Aerospace Medical Squadron bioenvironmental engineering technician, reads the heat index on a manual Wet Bulb Globe Temperature meter July 17, 2018, at Kadena Air Base, Japan. The heat index is used to determine the current flag conditions for the entire installation. (U.S. Air Force photo by Senior Airman Omari Bernard)
Details Download

180717-F-ZC102-1011

U.S Air Force Senior Airman Rodulfo Castro, 18th Aerospace Medical Squadron bioenvironmental engineering technician poses next to Wet Bulb Globe Temperature Meters July 17, 2018, at Kadena Air Base, Japan. The 18th AMS Bioenvironmental Engineering Flight is responsible for testing Kadena’s water supply, heat index and air quality. (U.S. Air Force photo by Senior Airman Omari Bernard)
Details Download

180717-F-ZC102-1014

U.S Air Force Senior Airman Rodulfo Castro, 18th Aerospace Medical Squadron bioenvironmental engineering technician, relays the current flag condition to the Command Post July 17, 2018, at Kadena Air Base, Japan. The 18th AMS Bioenvironmental Engineering Flight is responsible for testing Kadena's water supply, heat index and air quality. (U.S Air Force photo by Senior Airman Omari Bernard)
Details Download

180718-F-ZC102-1015

The Risner Fitness Center displays the current flag condition for July 19, 2018, at Kadena Air Base, Japan. The 18th Aerospace Medical Squadron’s Bioenvironmental Engineering Flight monitors temperatures throughout the day to ensure the safety of Airmen and civilians working in the heat. (U.S. Air Force photo by Senior Airman Omari Bernard)
Details Download

180727-F-NC874-0022

U.S. Air Force Senior Airman Michael Hall and Senior Airman Christopher Tallan, both 18th Logistics Readiness Squadron cryogenic production operators, prepare to fill a cart with liquid oxygen July 27, 2018, at Kadena Air Base, Japan. The production plant provides liquid nitrogen and oxygen to different organizations throughout the island.(U.S. Air Force photo by Staff Sgt. Jessica H. Smith)
Details Download

180727-F-NC874-0045

U.S. Air Force Senior Airman Michael Hall, 18th Logistics Readiness Squadron cryogenic production operator, fill a cart with liquid oxygen July 27, 2018, at Kadena Air Base, Japan. The production plant has been operational for nearly a year and has been very successful.(U.S. Air Force photo by Staff Sgt. Jessica H. Smith)
Details Download